New software-automatic cell count. Safer than ever.	Stock #	20100
	Input	9-14V
	Charge Range	1-4 Lipos
	Selectable charge current	0.1 -1.5A
	Automatic cut off	Charging time approx 1-2 hrs

             

NEW Added Features:

Easy  jumper plug programming with newly developed logic

Auto Cell count setting option to prevent fatal overcharging with the risk of burning the battery.

    Charge 1-4 Lipo cells 0.1-0.25-0.5-0.75-1-1.5 A 

    Cutoff voltage 4.16 V per cell

Gives you the highest fill rate possible

Precision Voltage Reading in 1 Hundreds of one Volt

Automatic charge till full

 

KOKAM 402 new software Charger

Kokam is the manufacturer of one of the best rechargeable Lipo batteries available. As a responsible manufacturer Kokam made a study of accidents which happened in the early days of the Lipo cells. The result was:

Over 92% of all accidents were caused due to overchargin and wrong charger settings.

What is this? Lithium Polymer batteries have a very critical charge cycle which has to be closely monitored by the charger sensors. The powerful Lithium cells may only be charged to a maximum of 4.16 Volts per cell. That means a 2 S battery would have a limit of 2x 4.16 V = 8.32 Volts etc.

If the charger setting is wrong (too high), for example set to 3 cells the voltage would exceed the maximum level and a devastating process would start, which results in burning of the battery.

It sounds simple, but a lot of guys had 2-3 or even 4 cell packs as well as 2 cell packs. If they forgot to re-adjust to 2 cells after charging a 4 cell battery, a violent fire was inevitable.

We charge already for more than 8 months now still the same batteries and have no problems.

It is save to use and charge Lipos if you watch what you are doing.